Antares autotune4 사용자 설명서
46
1. In the Edit Scale Display, click the Remove buttons next to the notes B,
D, F# and G#.
2. Play “A2-A3-A2 sweep” again.
You will now hear an arpeggiated A Major triad because you have removed
all the other notes from the scale.
all the other notes from the scale.
To continue:
1. In the Edit Scale Display, click the Bypass button next to E.
2. Play “A2-A3-A2 sweep” again.
You will now hear the effect of not correcting the E. During the time that
Auto-Tune 4 would normally be tuning the input to E, Auto-Tune 4 instead
enters bypass mode and passes the input through uncorrected.
Auto-Tune 4 would normally be tuning the input to E, Auto-Tune 4 instead
enters bypass mode and passes the input through uncorrected.
To continue:
1. Set the Retune Speed to about 30.
2. Play “A2-A3-A2 sweep” again. Compare the 30 setting to the 0 setting.
3. Try various other Speed settings.
The setting of 0 is fast: Auto-Tune 4 makes instantaneous pitch changes.
The setting of 30 is slower. Auto-Tune 4 makes gradual pitch changes. This
parameter controls how rapidly the pitch correction is applied to the
incoming pitch. The units are milliseconds. A value of zero will cause
instantaneous changes from one tone to another and will completely
suppress a vibrato (note that related volume changes will remain). Retune
values from 10 to 50 are typical for vocals.
The setting of 30 is slower. Auto-Tune 4 makes gradual pitch changes. This
parameter controls how rapidly the pitch correction is applied to the
incoming pitch. The units are milliseconds. A value of zero will cause
instantaneous changes from one tone to another and will completely
suppress a vibrato (note that related volume changes will remain). Retune
values from 10 to 50 are typical for vocals.
To continue:
1. Set the Retune Speed to 0
2. In the Edit Scale Display, click the Remove buttons next to to all the
notes except F#.
3. Play “A2-A3-A2 sweep” again. As the sound is playing, move Scale
Detune knob.
The output pitch will be locked to F#, however, you will hear the output
pitch change with the Detune slider movement. This is because the Detune
knob is changing the pitch standard of the scale.
pitch change with the Detune slider movement. This is because the Detune
knob is changing the pitch standard of the scale.
Finally:
1. Select “sine wave” from the Vibrato Type pop-up.
2. Play “A2-A3-A2 sweep” again.
3. Experiment with the various vibrato controls to hear their effects.