Audioline dect4500 사용자 설명서

50

NOTE Before setting-up, it is essential that you read the General Information at the 
beginning of this manual. 

The following items are supplied: 

one base station 

one mains power supply 

one handset with belt clip 

two standard batteries 

one telephone connecting cable 

one instruction manual   

Position the base station near to your telephone connection socket and to a mains 
socket. Your telephone works using Touch-Tone Dialling. 

1. 

Insert the plug of the power supply into the socket on the rear of the base 
station and plug the power supply into a properly installed 230 V mains socket. 
The plug-in power supply for the base station must always be connected.  For 
safety reasons, use only the plug-in mains power supply provided. 

2. 

Connect the telephone cable supplied to the telephone socket and the 
telephone jack on the rear of the base station. Use only the new telephone 
cable provided.

3. 

If required, clamp the two cables in the cable channel underneath the foot 
support and then run these through the two openings towards the rear. 

Note: The two plugs must audibly click into place so that they do not fall out again.