3com 3c905c-tx-m, 3c905c-tx 사용자 설명서

다운로드
페이지 96
3
W
INDOWS
 95/98 
AND
 
W
INDOWS 
NT 
D
RIVER 
I
NSTALLATION
This chapter describes how to install the NIC driver and 
software on a PC running Windows 95, Windows 98, 
Windows NT 4.0, or Windows NT 3.51. 
To obtain the latest shipping version of a driver, contact 
your PC manufacturer.
Overview
You install the NIC driver and software using the 
EtherDisk diskettes after you have run the preinstallation 
program and installed the NIC in your PC, as described 
in Chapter 2. 
The NIC driver can be used in both Microsoft and NetWare 
network environments.
Do not use the 3Com Intelligent Auto Install software to 
install the NIC driver under Windows 95, Windows 98, 
or Windows NT. The Intelligent Auto Install software 
is for Windows 3.x and DOS clients connecting to a 
NetWare server. See Chapter 4 for more information.
Installing the Driver
To install the NIC driver and software, follow the steps 
in the section appropriate for your operating system.
Windows 95
If you encounter problems during the installation, see 
the W95NDIS.TXT file located in the HELP directory 
on EtherDisk diskette 3 for troubleshooting tips.
Before installing the NIC driver and software:
Make sure that you have run the preinstallation 
program, as described in Chapter 2.
Make sure that the NIC is installed in the PC and 
that it is connected to the network.
book  Page 27  Monday, March 15, 1999  1:31 PM