3com fast etherlink xl pci 10-100base-tx 사용자 설명서

다운로드
페이지 78
4-6
C
HAPTER
 4: T
ROUBLESHOOTING
Running the Echo Test
The echo test tests the 3C905B-TX NIC’s ability to transmit 
and receive data while on the network.
You need two PCs with 3Com NICs installed to run an echo 
test: one PC to send data and one PC to receive data.
CAUTION: Running the echo test while connected to an 
active network can cause intermittent failures. To avoid 
this, connect to an inactive network on which only the PC 
being tested is operating.
To run the echo test, follow these steps:
1 Make sure that the 3C905B-TX NIC is installed in the 
and that the network driver is installed (
2 Install a 3C905B-TX NIC in another PC (the echo server), 
connect it to the network, and install the network 
driver. 
The echo server PC is the responding PC.
3 On both PCs:
Click the Windows Start menu. 
Select Programs.
Select 3Com NIC Utilities.
Select 3Com NIC Diagnostics.
Click the Diagnostics tab to display the Diagnostics 
screen, shown in 
4 Click Respond on the Diagnostics screen (
of the responding PC.
The Echo Test Responder screen appears on the 
responding PC.
5 Click Start on the Echo Test Responder screen.
6 On the Diagnostics screen (
PC, click Send.
7 On the Diagnostics screen (
PC, click Start.
The statistics for the test appear in the Statistic section of 
the window.