3M dynatel m-series 사용자 설명서

6. Tap OK. Tap OK again.

Create iD Marker Dictionary as follows:

1.  Tap the SECTION LIST and SELECT DATA
2.  Tap the SUB SECTION BOX and SELECT FILE MANAGER
3.  Choose File Type:

Dictionaries

4.  Tap the Option button and choose New dictionary.
5.  Create dictionary file:  "Dynatel"
6. Tap OK
7.  Tap the Option button and choose Edit dictionary.
8.  Tap the Edit and select New Feature
9.  Enter the Feature Name:

"ID Marker"

10. Select Feature Classification as Point
11. Tap  OK.
12. Tap the Edit and select New Attribute
13. Select New Attribute type as Text
14. Tap  Add
15. Enter Attribute Name:  " iD Data "
16. Enter Length:

"100"

17. On Creation: Normal
18. On Update: Normal
19. No  increment
20. Tap  OK
21. CLOSE
22. Tap  Save
23. tap  OK.

Please refer to the section “3M™

Dynatel™ Locator Setup” for more details on

how to setup the Locator.

• Connect the Trimble™ GeoXT™ to the 3M™ Dynatel™ M-series Locator

using a standard DB9 cable as provided with the 3M™ Dynatel™ Locator.

Note: Do not use the null modem adapter!

Start a new logging job on the Trimble™ as follows:

1.  Tap the Section List in the upper left hand corner and tap Data.
2.  Tap the Sub-Section BOX in the upper left hand corner and tap New File.
3.  Enter the logging file name.
4. File Type:

Rover

5. Select Dictionary Name:

ID Marker

6.  Tap Create and confirm Antenna Height.
7.  Turn on the 3M™ Dynatel™ Locator and go to the marker locate mode.
8.  When a marker has been located and the GPS device has acquired a

position with adequate precision for your needs, press the Read key on
the 3M™ Dynatel™ Locator.