Aiwa JAX-PK77 사용자 설명서
16
GB
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 14).
(see “Presetting radio stations” on page 14).
1
Press TUNER BAND (or FUNCTION
repeatedly) to switch the function to
tuner.
repeatedly) to switch the function to
tuner.
2
Press TUNER BAND repeatedly until
the desired band appears in the
display.
the desired band appears in the
display.
The bands you can receive vary depending
on the model you purchased.
Be sure to check which bands you can
receive.
on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press the button, the band
changes cyclically as follows:
2 band model: FM
changes cyclically as follows:
2 band model: FM
y AM
3 band model: FM
t MW t SW
3
Press TUNING MODE repeatedly until
“PRESET” appears in the display.
“PRESET” appears in the display.
4
Press – or + (or turn TUNING operation
dial on the unit) repeatedly to select the
desired preset station.
dial on the unit) repeatedly to select the
desired preset station.
Listening to non-preset radio
station
station
— Manual Tuning
1
Press TUNER BAND (or FUNCTION
repeatedly) to switch the function to
tuner.
repeatedly) to switch the function to
tuner.
2
Press TUNER BAND repeatedly until
the desired band appears in the
display.
the desired band appears in the
display.
The bands you can receive vary depending
on the model you purchased.
Be sure to check which bands you can
receive.
on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press the button, the band
changes cyclically as follows:
2 band model: FM
changes cyclically as follows:
2 band model: FM
y AM
3 band model: FM
t MW t SW
3
Press TUNING MODE repeatedly until
“AUTO” and “PRESET” disappear from
the display.
“AUTO” and “PRESET” disappear from
the display.
4
Press – or + (or turn TUNING operation
dial on the unit) repeatedly to tune in
the desired station.
dial on the unit) repeatedly to tune in
the desired station.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
external antenna.
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.
There will be no stereo effect, but the reception will
improve.
• Press TUNING MODE repeatedly until “AUTO”
appears in step 3 above, then press – or + (or turn
TUNING operation dial on the unit). The frequency
indication changes and scanning stops when the
system tunes in a station (Automatic Tuning).
TUNING operation dial on the unit). The frequency
indication changes and scanning stops when the
system tunes in a station (Automatic Tuning).
• To record the radio programs, use manual recording
Listening to the radio
Frequency
Preset number