Avaya ip office 5410 사용자 설명서

2410user 

You can replace the default label shown for any function key with you own custom label of up to 13 
characters.  

1. Press   Exit to exit any other mode, then press any of the 

 keys below the display.  

2. Press 

 Label.  

• 

Edit allows you replace the current labels, see the steps below. 

• 

Inspect displays the default labels.  

• 

Restore replaces any custom labels with the default labels. 

• 

Done exits the button labelling options. 

3. Press 

 Edit. 

4.  Select the function key whose label you wish to change.  

5.  Begin entering the New Label text using the telephone keypad.  

• 

Each number key is marked with the letters it provides. You may have to press the key 
more than once depending on the character required. For example, the key 6 is also 
marked as M, N and O. To enter an O, re-press the 6 key until an O is displayed.  

• 

If the next character you want is on another key, simply key the next character. 

• 

If the next character you want to enter is on the same key just used, press   to move the 
cursor right and then enter the character.  

• 

Pressing the * key once enters a . (period). Pressing it twice enters a *.   

• 

Pressing the # key once enters a - (dash). Pressing it twice enters a #.   

• 

By default the first letter entered and the first letter after any space are entered in upper-
case whilst all other character are entered in lower-case. To change the case of the 
current character press 

 Case.  

• 

To enter a space press 

 Space.  

• 

Use the   key to move the cursor one space right.  

• 

If you make a mistake, use Backspace to delete the character to the left of the cursor. 

• 

If you have made a mistake in the middle of a character string and do not wish to 
backspace and re-enter all the characters use the   key to step back to one character 
before the point where you wish to edit. Either insert the new character or press 
Backspace to delete the character to the left of the cursor. 

• 

Press 

 Clear to delete all the current text. 

6.  When the new name is set as required, press Save. To return to the label options screen without 

saving the changes, press Cancel.  

7.  Select another button to re-label or press 

 Done.