Avaya ip office 5410 사용자 설명서

Using the Call Log 

1. Press 

 Log. If 

 Log is not shown, press any 

 Soft Key. 

2. At default, Missed calls are displayed first. You can select from InAns or Outgo. Alternatively, 

press More and select All to display all three options. To return to Missed or InAns or Outg, 
press Back and make your selection. 

3. Press   and   to display different pages of log entries.  

4.  When you locate the entry you want to call, press the 

 or 

 key next to the entry.  

5. Press Delete. The entry is deleted from the Call Log and the details of the next call are shown.  

6.  Press Done to return to the main screen 

• 

To exit the logged call details and return to the main call log screen press Done.  

• 

To exit the call log and return to the call handling screen press 

Exit.  

Loss of power to the phone will cause all call log entries to be deleted. In addition you can manually 
select to erase the call log, see Default Phone/Erase All Settings.  

 

Caution: If you change these settings, any call details already in the call log that no longer match the 
selection are deleted.  

1. Press   Exit to exit any other mode, then press any of the 

 keys below the display. 

2. Press Option.  

3. Press   Log Setup. A menu showing Answered, Un-Answered and Outgoing, with their 

current settings, is displayed. .  

4.  To toggle a particular setting between Yes and No, press the 

 key next to it.  

Alternatively, press the 

 key next to a call type to underline its current setting and then press 

Yes/No to change the value of the currently underlined setting.  

5.  Do one of the following: Note:  If you press the Save after changing the settings, any existing call 

log entries that do not match the call types selected are deleted from the call log. 

• 

To save the settings and return to the options menu, press Save. You will hear a 
confirmation tone.  

• 

To return to the Options menu without saving any changes, press 

 Cancel.  

• 

To return to the call handling screen without saving any changes, press 

 Exit.