Avaya 4600 사용자 설명서
4600 Series IP Telephone Installation Guide
Static Addressing Installation
3-4
4.
Enter the appropriate value for the port number followed by the
#
button.
The following message is displayed:
where “nnn.nnn.nnn.nnn” is the value of the Gateway/router IP address.
5.
Enter the IP address of the Gateway/router followed by the
#
button.
The following message is displayed:
where “nnn.nnn.nnn.nnn” is the value of the IP netmask.
6.
Enter the IP netmask followed by the
#
button.
The following message is displayed:
where “nnn.nnn.nnn.nnn” is the value of the TFTP server IP address.
7.
Enter the IP address of the TFTP server followed by the
#
button.
The following message is displayed:
8.
Press the # button to save the new values you have entered.
The following message is displayed:
Once the new values are stored, the telephone is reset.
If a new boot program is downloaded from the TFTP server after you enter static addressing
information, you will need to reenter your static addressing information.
information, you will need to reenter your static addressing information.
QOS Option Setting
3
Administering QOS options is not mandatory, but it is highly recommended.
Use the following procedure to set Quality of Service (QOS) options.
1.
While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
the telephone:
Hold 7 6 7 #
(
Hold Q O S #
)
Router=nnn.nnn.nnn.nnn
New=_
or
nnn.nnn.nnn.nnn
Router=_
Mask=nnn.nnn.nnn.nnn
New=_
or
nnn.nnn.nnn.nnn
Mask=_
FileSv=nnn.nnn.nnn.nnn
New=_
or
nnn.nnn.nnn.nnn
FileSv=_
Save new values?
*=no #=yes
New values
being saved