Avaya 4600 사용자 설명서

Use the following procedure to create a DHCP scope for the IP telephones.

1. Select Start-->Programs-->Admin Tools-->DHCP Manager.

2. Expand Local Machine in the DHCP Servers window by double clicking it until the + sign 

changes to a - sign.

3. Select Scope-->Create.

4. Define the range of IP addresses used by the IP telephones listed in 

.

The Start Address is the first IP address to be used for the IP telephones.

The End Address is the last IP address to be used for the IP telephones.

Set the Subnet Mask to the value recorded in 

.

To exclude any IP addresses you do not want assigned to IP telephones within the Start 
and End Addresses range:

a. In the Exclusion Range Start Address field, enter the first IP Address in the range that 

you want to exclude.

b. In the Exclusion Range End Address field, enter the last IP Address in the range that 

you want to exclude.

c. Click the Add button.

d. Repeat steps a. through c. for each IP address range to be excluded.

Example: 

Suppose the range of IP addresses available for your IP telephone network are:

●

135.254.76.7 to 135.254.76.80

●

135.254.76.90 to 135.254.76.200

●

135.254.76.225 to 135.254.76.230

Your start address and end address are 135.254.76.7 and 135.254.76.230 
respectively.

Exclude the ranges 135.254.76.81 to 135.254.76.89 and 135.254.76.201 to 
135.254.76.224.

Note:

We recommend that you provision the 4600 Series IP Telephones with 
sequential IP addresses.

We recommend not mixing 4600 Series IP Telephones and PCs in the 
same scope.