Adaptec 48300 사용자 설명서
Appendix C: Using the ARC Utility
●
69
Formatting and Verifying Disk Drives
You can use the disk utilities to low-level format or verify your disk drives. (New disk drives
are low-level formatted at the factory and do not need to be low-level formatted again.)
are low-level formatted at the factory and do not need to be low-level formatted again.)
Caution:
Before you format a disk drive, back up all data. Formatting destroys all data on
a disk drive.
To use the disk utilities:
1
Turn on your computer and press Ctrl+A when prompted to access the ARC utility.
2
From the ARC utility menu, select Disk Utilities.
3
Select the desired disk, then press Enter.
You are offered the following options:
●
Format Disk—Simulates a low-level format of the disk drive by writing zeros to the
entire disk. SATA drives are low-level formatted at the factory and do not need to be
low-level formatted again.
entire disk. SATA drives are low-level formatted at the factory and do not need to be
low-level formatted again.
Caution:
Formatting destroys all data on the disk. Be sure to back up your data
before performing this operation.
●
Verify Disk Media—Scans the media of a disk drive for defects.
Device ID
None
Displays device ID
Controller Serial
Number
Number
None
Displays controller serial number
Controller WWN
None
Displays the controller WWN
SerialSelect Options
Available Settings
Description
!
!