Avaya office 5410 사용자 설명서

Function Key Programming

Function Keys - Page 27

IP Office 5410 User’s Guide

Function Keys - Page 27

40DHB0002UKEY – Issue 1 (7th February 2005)

Function Key Programming

Longhand Programming

Expl?

to switch to longhand programming mode.

3. Press

Next

until the required feature required is shown, then press Selct

4. If the feature requires some data to be entered, [ is shown at the bottom of the

display. Enter the data using the normal telephone keypad.

5. The upper part of the display reverts to showing the features currently assigned to

each

and

key.

6. Use

the and

keys to move between the pages of display keys.

7. Select the display key against which to program the new feature by pressing that

key

CAUTION: Do not select the slot used for the Admin function. Replacing this

function will lock the phone for further programming until reset
through the telephone system by your System Administrator.

8. If the display slot is not already used, the display shows BUTTON

PROGRAMMED!. Press the

keys until EXIT is shown.

•

Press

EXIT to end programming or

•

Press Cont

to continue programming other functions.

9. If the display slot already has a programmed function, the display shows

FEATURE ON BUTTON.
•

Press Repla

to replace that existing function with the one just

programmed. The display then shows BUTTON PROGRAMMED! as above.

•

Press Keep

to keep the existing function and forget the function just

programmed.

•

Press Delete

to delete the existing function and forget the function just

programmed.