Avaya ip office 3.2 5601 사용자 설명서

Redial 

Basic Call Handling Features - Page 5 

The Redial (or Last Number Dialed) feature automatically redials the last extension or 
outside number (up to 24 digits) you dialed. 
 

To redial the last number that you dialed: 
1. Press 

 Redial. 

 

Your Message lamp turns on when a caller has left a message for you.  

Lift the handset and press the 

 Message button to retrieve your messages, and 

follow the prompts. 

The Transfer feature allows you to transfer a call from your telephone to another 
extension or outside number. 

To transfer the current call to another extension 
1.  With a call in progress, press 

 Transfer. 

2.  When you hear dial tone, dial the number to which the call is to be transferred. 
3.  Do one of the following: 

• 

To transfer the call without announcing it, press 

 Transfer again and 

hang up. The transfer is complete. 

• 

To announce the call before transferring it, wait for the called party to answer. 
If the called party is willing to accept the call, hang up to complete the transfer.  
If the called party does not wish to accept the call, press 

 Transfer again 

to return to the original caller.  

• 

If the line is busy or if there is no answer you can return to the held call by 
pressing it’s call appearance button. 
 

To transfer a new call to a held call using Conference: 
1.  With a call in progress and you wish to make an enquiry call or another call arrives, 

press 

 Hold. Make or answer the second call. The second call requires to be 

transferred to the first held call. 

2.  To transfer the new call to the held call, press 

 Conference and then 

 

Drop. The transfer is complete. 
 

The Conference feature allows you to conference other parties (including yourself) into 
a call. The number of parties allowed in a conference is controlled by your telephone 
system.  

To add another party to a call: 
1. Press 

 Conference. 

2.  Dial the number of the person you want to add to the call. 
3.  Wait for an answer. 

If the called party does not answer or does not want to join the conference, press 

 Drop. You can return to the held call by pressing its call appearance button. 

4.  To add the person to the call, press 

 again.  

5.  Repeat Steps 1 through 4 for additional conference connections. 

 

To add a held call to an active call 
1. Press 

 Conference. 

2.  All calls that are on Hold are added to the conference. 
 

IP Office (R3.0) 5601 User Guide 

Basic Call Handling Features - Page 5 

40DHB0002UKFF – Issue 1 (7th February 2005) 

Redial