HP 2000 사용자 설명서

Atheros 9485GN 802.11b/g/n 1×1 WiFi and 3012 Bluetooth 4.0 Combo Adapter

655795-001

Atheros AR9002WB-1NGB 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter
(BT3.0+HS ready)

593127-001

Broadcom 4313GN 802.11b/g/n 1×1 WiFi and 20702 Bluetooth 4.0 Combo Adapter

657325-001

Ralink 5390GN 802.11b/g/n 1x1 WiFi Adapter

630703-001

Realtek 8188BC8  802.11a/b/g/n 2x2 WiFi and Bluetooth 3.0+HS Combo Adapter

602993-001

Realtek 8188GN 802.11b/g/n 1x1 WiFi Adapter

640926-001

To prevent an unresponsive system, replace the wireless module only with a wireless

module authorized for use in the computer by the governmental agency that regulates wireless
devices in your country or region. If you replace the module and then receive a warning message,
remove the module to restore device functionality, and then contact technical support.

Before removing the WLAN module, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the memory module/wireless module compartment cover (see 

).

Remove the WLAN module:

Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

The #1 WLAN antenna cable is connected to the WLAN module #1 terminal. The #2

WLAN antenna cable is connected to the WLAN module #2 terminal.

Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board.
(The WLAN module tilts up.)

Component replacement procedures

43