HP 2533t mobile thin client 서비스 매뉴얼
12.
If it is necessary to replace the display bezel, display hinges, display panel cable, or display
enclosure, remove the four rubber screw covers (1) and (2) and the four Torx T8M2.5×6.0
screws (3) that secure the display bezel to the display assembly.
enclosure, remove the four rubber screw covers (1) and (2) and the four Torx T8M2.5×6.0
screws (3) that secure the display bezel to the display assembly.
NOTE:
The rubber screw covers (1) on the display bezel top edge are thicker than the rubber
screw covers (2) on the display bezel bottom edge. The rubber screw covers are available in the
Rubber Kit, spare part number 481106-001.
Rubber Kit, spare part number 481106-001.
13.
Flex the inside edges of the bottom (1), left and right sides (2), and the top (3) of the display bezel
until the bezel disengages from the display enclosure.
until the bezel disengages from the display enclosure.
14.
Remove the display bezel (4). The display bezel is available using spare part number
481097-001.
481097-001.
15.
If it is necessary to replace the display hinges, remove the two Phillips PM2.5×4.0 screws (1) that
secure the display panel to the display enclosure.
secure the display panel to the display enclosure.
50
Chapter 4 Removal and replacement procedures