HP designjet l65500 서비스 매뉴얼
Moving the Printer
Move the printer
817
7.
Place the Flushing Tool in the space left when the ink cartridge
was removed, and connect the ink connector to the connection
port of the tool.
8.
Connect cable from the Flushing Tool to J18 on the ISM Board.
9.
From the Front Panel go to the Diagnostic Menu and select Ink System Menu 4.0>Flushing procedure>Activate
Flushing tool Pump.
10.
Open the Entry Electrovalve of the color you are flushing Ink System Menu 4.0>Flushing procedure>Operate
Entry electrovalve-> “Color to flush”.
11.
Unscrew the top of the Cleaning Tool and fill the bottle with 500cc of distilled water.
12.
Insert a needle into the tube coming from a waste bottle
13.
Insert the needle into the Printhead Ink Connector of the
Carriage assembly. Ensure you insert it into the correct color.