Canon ir5870c, ir5870ci, ir6870c, ir6870ci 매뉴얼
5
1) Press the User Mode button.
2) Press [System Additional Functions Settings].
3) Press [Network Settings].
4) Set the confirmation display for the change settings
2) Press [System Additional Functions Settings].
3) Press [Network Settings].
4) Set the confirmation display for the change settings
/Display connection confirm.
5) Make <TCP/IP Settings>.
MEMO:
For more information, see "Network Guide" in the Us-
ers' Manual.
For more information, see "Network Guide" in the Us-
ers' Manual.
2. PC Print Confirmation Procedure (reference in-
formation)
formation)
- After installing the printer driver to a PC running
Windows 9x/Me/2000/XP/Server2003, you can make
a print from the PC to the iR host machine.
Windows 9x/Me/2000/XP/Server2003, you can make
a print from the PC to the iR host machine.
- You can check whether or not print from a PC is con-
ducted properly by executing the test page print of the
printer driver.
ducted properly by executing the test page print of the
printer driver.
- To install the printer driver,
Set the LIPS LX user software CD on the CD-ROM
drive and follow the procedure which is automatically
activated. If the procedure is not automatically acti-
vated, double-click Setup.exe in the CD-ROM.
For more information, see Readme.txt in the CD-
ROM.
Set the LIPS LX user software CD on the CD-ROM
drive and follow the procedure which is automatically
activated. If the procedure is not automatically acti-
vated, double-click Setup.exe in the CD-ROM.
For more information, see Readme.txt in the CD-
ROM.
- Use the IP address that you can obtain from User
Mode> System Additional Functions Settings > Net-
work Settings> TCP/IP Settings> IP Address Settings
on the control panel o If an IP address of the iR host
machine is set,
f the iR machine as a port setting of the printer driver.
Mode> System Additional Functions Settings > Net-
work Settings> TCP/IP Settings> IP Address Settings
on the control panel o If an IP address of the iR host
machine is set,
f the iR machine as a port setting of the printer driver.
e.g.: Select LIPSLX PrinterDriver Setup Wizard>
Printer Information Setup> Port Setup> Add Port and
press Setup button. Select Standard TCP/IP Port, and
when the window to add a standard TCP/IP printer
port appears, enter the obtained IP address of the iR
host machine to the IP address.
Printer Information Setup> Port Setup> Add Port and
press Setup button. Select Standard TCP/IP Port, and
when the window to add a standard TCP/IP printer
port appears, enter the obtained IP address of the iR
host machine to the IP address.
To print the test page,
After installation of the printer driver is completed, re-
start the PC if necessary, and then select the added
printer from Start> Setup> Printer. Right-click the
mouse to indicate the menu, and then open Property.
Press the test page button in General Settings tab.
After installation of the printer driver is completed, re-
start the PC if necessary, and then select the added
printer from Start> Setup> Printer. Right-click the
mouse to indicate the menu, and then open Property.
Press the test page button in General Settings tab.
MEMO:
For information on connection with a PC, see “Net-
work Guide” in the Users’ Manual.
For information on installation of the driver, see
“Software Guide” in the Users’ Manual.
For information on connection with a PC, see “Net-
work Guide” in the Users’ Manual.
For information on installation of the driver, see
“Software Guide” in the Users’ Manual.
3. Installation of ScanGear
- Install ScanGear Software from Color Network
- Install ScanGear Software from Color Network
ScanGear CD-ROM to read originals from the
reader to the PC.
reader to the PC.
MEMO:
Verify that [Remote Scanner] is indicated on the con-
trol panel of the host machine.
After this kit is installed, [Remote Scanner] is indicat-
ed on the control panel.
Verify that [Remote Scanner] is indicated on the con-
trol panel of the host machine.
After this kit is installed, [Remote Scanner] is indicat-
ed on the control panel.
1) Execute Setup.
2) Following the instructions given in the window, in-
2) Following the instructions given in the window, in-
put the IP address, etc., of the host machine.
3) Start up ScanGear and check if data can be read.
MEMO:
For more information, see “Color Network ScanGear”
in the Users Manual.
For more information, see “Color Network ScanGear”
in the Users Manual.
- After installing this product, be sure to conduct "Au-
to Gradation Adjustment" of the host machine for
color adjustments.
color adjustments.
Additional Functions>Adjustment/Cleaning>Auto
Gradation Adjustment>Full Adjust.