HP color laserjet 2550 series 서비스 매뉴얼
9. Use needle-nose pliers to unhook two springs (callout 7), one at each side of the tray 1
guide, and then remove the tray 1 guide.
7
6
Figure 5-33.
Removing tray 1 (2 of 2)
Reinstallation tip
The two springs should remain attached to two pegs inside the printer. If the springs are
not attached, use needle-nose pliers to reattach them before reinstalling the tray 1 guide.
not attached, use needle-nose pliers to reattach them before reinstalling the tray 1 guide.
Tray 1 separation pad assembly
1. Remove tray 1 (see
ENWW
Removal and replacement
135