HP color laserjet 4500 사용자 설명서

Chapter 1 Troubleshooting control panel messages

 EN

1

13.11 Paper in the paper path is 
too long. Check the Tray 1 area. 
Check the entire paper path.

8

13.3 Jam in duplex reverse unit. 
Inspect the rear of the duplex unit 
and the duplex tray.

2

13.10 Paper in the paper path is 
too short. Check the Tray 1 area. 
Check the entire paper path.

9

13.2 Jam in fusing area. Check the 
fuser assembly, output assembly, 
and duplex unit.

3

13.9 Irregular paper jam in the 
paper path. Check the Tray 1 area. 
Check the entire paper path.

10

13.1 Jam in fusing area. Check the 
fuser assembly, output assembly, 
and duplex unit. 

4

13.8 Door open jam. Check the 
rear door, duplex cover, and rear 
output door.
13.7 Jam in paper feed area. 
Check the entire paper path.

11

13.1 Paper jam. 

OPEN MIDDLE 

FRONT DRAWER 

alternates with 

CHECK IN REAR OF DRAWER. 

Check the middle front drawer. 
Check and pull out the fuser.

5

13.6 Jam in duplex paper feed 
area. Inspect the rear of the duplex 
unit and the duplex tray.

12

13.1 Paper jam: Check in rear of 
drawer. Check the rear of the 
middle front drawer. Reseat the 
transfer roller.

6

13.5 Jam in duplex paper feed 
area. Inspect the rear of the duplex 
unit and the duplex tray.

13

13.0 Jam in input feed area. Check 
the input trays and duplex unit.

7

13.4 Jam in duplex unit. Inspect 
the rear of the duplex unit and the 
duplex tray.

14

13.12 Paper did not clear the input 
sensor in time.