HP designjet l65500 매뉴얼
3.
Clean the interior of each ink deposit with a cotton swab or cloth dampened with distilled water. If
you cannot remove the dried ink this way, try using isopropyl alcohol instead of distilled water.
you cannot remove the dried ink this way, try using isopropyl alcohol instead of distilled water.
4.
Also clean the area around the ink deposits; but do not try to clean the printhead area.
5.
Close the printhead access door.
Clean the line sensor and aerosol inlets
In the course of normal use, the line sensor becomes gradually blinded by light deposits of dried ink.
An alert is displayed when the line sensor needs to be cleaned, which may be about every two months,
depending on your use of the printer. When you see the alert, follow this procedure to clean the sensor.
An alert is displayed when the line sensor needs to be cleaned, which may be about every two months,
depending on your use of the printer. When you see the alert, follow this procedure to clean the sensor.
1.
Go to the front panel and select Clean line sens. & inlets from the Preventive Maintenance menu
.
2.
The printer raises the carriage beam so that you can access the sensor.
3.
Wait for the front panel to announce that the sensor is ready for cleaning.
4.
Dampen a cotton swab with isopropyl alcohol. Swabs are provided in the Cleaning Kit.
16
Chapter 4 Hardware maintenance
ENWW
Hardwa
re ma
int
enance
enance