HP digital sender 9200c 서비스 매뉴얼
NOTE
The firmware update involves a change in the format of nonvolatile random-access
memory (NVRAM). Any menu settings that are changed from the default settings might return
to default settings and must be changed again if you want settings that are different from the
defaults.
to default settings and must be changed again if you want settings that are different from the
defaults.
1
If you do not already have it, get the TCP/IP address of the digital sender from the Jetdirect
page. The HP Jetdirect page is the second page that you see when viewing the configuration
page on the control panel.
page. The HP Jetdirect page is the second page that you see when viewing the configuration
page on the control panel.
NOTE
Before connecting to the digital sender, make sure that it is not in Sleep mode.
Also make sure that any error messages are cleared from the control-panel display.
2
Open a command window on your computer.
3
Type:
ftp <TCP/IP ADDRESS>
. For example, if the TCP/IP address is 192.168.0.90, type
ftp
192.168.0.90
.
4
Press
Enter
on the keyboard.
5
When prompted for the user name, press
Enter
.
6
When prompted for the password, press
Enter
.
7
Type
bin
at the command prompt.
8
Press
Enter
. The message 200 Types set to I, Using binary mode to transfer files appears in
the command window.
9
Type
put <FILENAME>
, where <FILENAME> is the path to the .RFU file that you downloaded
from the Web. For example, type
put C:\LJ\3500FW.RFU
, and then press
Enter
.
NOTE
If the file name or path includes a space, you must enclose the file name or path
in quotation marks. For example, type
put "C:\MY DOCUMENTS\LJ\3500FW.RFU"
The following series of messages appears in the command window:
200 PORT command successful
150 Opening BINARY mode data connection
226 Ready
226 Processing Job
226 Transfer complete
Then, a message containing the transfer-speed information appears.
10
The download process begins and the firmware is updated on the device. This can take about
five minutes. Let the process finish without further interaction with the device or computer.
five minutes. Let the process finish without further interaction with the device or computer.
NOTE
The digital sender automatically restarts the firmware after processing the
upgrade.
11
At the command prompt, type
bye
to exit the ftp command.
12
At the command prompt, type
exit
to return to the Windows interface.
44
4 Maintenance