HP deskjet 970c 사용자 설명서
35
Using and Caring for Your Print Cartridges
2
4
Manually clean the print cartridges.
4.1
Dip a clean cotton swab into distilled water and squeeze any excess water
from the swab.
from the swab.
4.2
Clean the face and edges of the
print cartridge as shown. DO
NOT wipe the nozzle plate.
print cartridge as shown. DO
NOT wipe the nozzle plate.
4.3
Inspect the cartridge for fibers
on the face and edges. If fibers
are still present, repeat the
cleaning process.
on the face and edges. If fibers
are still present, repeat the
cleaning process.
4.4
Repeat the cleaning process for
the other print cartridge.
the other print cartridge.
Once you’ve removed the print cartridges, make sure that they are not
outside of the printer longer than 30 minutes.
outside of the printer longer than 30 minutes.
5
Manually clean the print cartridge cradle.
5.1
Using clean, moistened swabs, wipe
the underside of each wall of the
cradle.
the underside of each wall of the
cradle.
5.2
Repeat until no ink residue is seen on
a clean swab.
a clean swab.
6
Reinsert the print cartridges, then close
the printer’s top cover.
the printer’s top cover.
7
Load white paper into the IN tray.
8
Reinsert the electrical power cord into
the back of the printer.
the back of the printer.
9
Print a test page. From the
HP Toolbox
, click
Print a Test Page
.
Do not clean
nozzle plate
nozzle plate
Clean
Caution
Note:
If streaking still appears, repeat the procedure until the test printout
is clean. You will find additional maintenance tips at
http://www.hp.com/support/home_products.
http://www.hp.com/support/home_products.
970C.book Page 35 Tuesday, February 1, 2000 11:31 PM