HP deskjet 900 사용자 설명서
Configuring the OmniBook
Using BIOS Setup
Using BIOS Setup
90
Reference Guide
Power Menu
If you’re using Windows 98 in its standard power mode, power options you set in Power
Management Control Panel override corresponding settings in the Power menu.
Management Control Panel override corresponding settings in the Power menu.
If you’re using Windows 2000, only the settings marked with * are used, and other
settings in the Power menu are ignored.
settings in the Power menu are ignored.
Setting
Description
Default
Power Management
Mode
Mode
Disables time-outs, selects a combination of time-outs, or
allows customized time-outs.
allows customized time-outs.
Max Power
Savings
Savings
Smart CPU Mode
Enables automatic CPU power savings when running on
battery power. Absence of keyboard, mouse, and hard disk
activity could cause slower CPU response. For a model
without “900 B” after the serial number, this should normally
be Off to avoid interfering with time sensitive operations—
and this setting applies on both battery and ac power.
battery power. Absence of keyboard, mouse, and hard disk
activity could cause slower CPU response. For a model
without “900 B” after the serial number, this should normally
be Off to avoid interfering with time sensitive operations—
and this setting applies on both battery and ac power.
On (“900 B”)
Off (non
“900 B”)
Off (non
“900 B”)
Standby Time-out
Sets the period of inactivity after which the computer goes
from On to Standby power mode.
from On to Standby power mode.
2 minutes
Suspend Time-out
Sets the period of inactivity after which the computer goes
from Standby to Suspend power mode. (Skips Standby
mode if that time-out is disabled.)
from Standby to Suspend power mode. (Skips Standby
mode if that time-out is disabled.)
4 minutes
Hibernate Time-out
Sets whether the computer goes from Suspend to Hibernate
power mode after the indicated period of inactivity. (Skips
Suspend mode if that time-out is disabled.)
power mode after the indicated period of inactivity. (Skips
Suspend mode if that time-out is disabled.)
4 hours
Hard Disk Time-out
Sets the period of hard disk inactivity after which the hard
disk stops spinning. Also affects a hard disk drive in the
plug-in module bay.
disk stops spinning. Also affects a hard disk drive in the
plug-in module bay.
2 minutes
Time-out on AC
Sets whether power management time-outs occur while the
ac adapter is connected.
ac adapter is connected.
Disabled
Power Button Mode
Sets the action of the blue power button when pressed for
less than 4 seconds.
less than 4 seconds.
Suspend
Lid Switch Mode
Sets the action when the OmniBook lid closes.
Turn off LCD
Resume on Serial Ring
Sets whether the system resumes from Suspend if a ring
signal is received.
signal is received.
Enabled
Resume on Time of Day
Sets whether the system resumes from Suspend at a
defined time of day.
defined time of day.
Disabled
Resume Time
Sets the 24-hour time when the system resumes from
Suspend if enabled.
Suspend if enabled.
Auto Suspend on
Undock*
Undock*
Sets whether the OmniBook suspends after undocking.
When Lid
Closed
Auto Turn-on on Dock*
Sets whether the OmniBook turns on after docking.
Enabled
* For Windows 2000, only these settings are used. All other settings in this menu are ignored.