HP invent 355386-001 사용자 설명서

Battery Packs

Hardware Guide

3–7

The battery light continues to blink and:

■

If Hibernation is enabled (the default setting) and the 
notebook is on or in Standby, the system initiates Hibernation 
and saves system memory to the hard drive. Unsaved work 
might be lost.

■

If Hibernation is disabled and the notebook is on or in 
Standby, the notebook remains briefly in Standby, then 
shuts down. The power/Standby light turns off, and the 
notebook cannot save system memory to the hard drive.

Hibernation, enabled by default, is an important safeguard in 
low-battery situations. To verify that Hibernation is enabled, 
access the Power Meter icon, or:

»

Select Start > Control Panel > Performance and 
Maintenance > Power Options > Hibernate. Make sure that 
the Enable Hibernate support check box is selected.

Ä

CAUTION: If the notebook has reached a critical low-battery condition 
and initiated Hibernation, do not restore power until the power/Standby 
light turns off, indicating that the notebook is in Hibernation.

■

If external power is available to the notebook, connect the 
AC adapter.

■

If a charged battery pack is available, shut down the notebook 
or initiate Hibernation. Then insert a charged battery pack, 
and turn the notebook back on.

■

If no power source is available, save your work. Then initiate 
Hibernation or shut down the notebook.

If you cannot resume from Hibernation when power is restored to 
the system, you will be prompted to delete the restoration data 
and proceed with system boot. Unsaved data will be lost.