HP invent 355386-001 사용자 설명서

3–10

Hardware Guide

Battery Packs

1. Connect the notebook to external power and keep the 

notebook connected until the battery pack is fully recharged 
and the battery light turns off.

✎

You can use the notebook while the battery pack is recharging, but 
the battery pack will charge faster if the notebook is turned off.

2. Select the Power Meter icon on the taskbar or select Start > 

Control Panel > Performance and Maintenance > Power 
Options > Power Schemes.

3. Reenter the 3 settings you wrote down for the 3 options in the 

Plugged In column and for the 3 options in the Running on 
Batteries column.

4. Select the OK button.

Ä

CAUTION: To reenable Hibernation after calibrating the battery pack, 
select Start > Control Panel > Performance and Maintenance > Power 
Options > Hibernate, and then select the Enable Hibernation check box.

Using the battery conservation procedures and settings described 
in the following section extends the run time of the battery pack.

To conserve power while you use the notebook:

■

Plug in the AC adapter, especially if you are using a 
CD-ROM or DVD-ROM drive, or any external connections.

■

Turn off wireless and local area network (LAN) connections 
and exit modem applications when you are not using them.

■

Set the automatic timeout settings to emphasize saving 
power.