HP laserjet 1018 서비스 매뉴얼
4.
Remove two screws from the back of the printer (callout 3), disconnect the high-voltage wire
(callout 4) and then remove the engine-power assembly.
(callout 4) and then remove the engine-power assembly.
NOTE
Be careful not to lose the two springs that are behind the engine-power assembly.
3
4
Figure 5-24
Remove the engine power assembly (2 of 2)
Reinstallation tip
When reinstalling the engine-power assembly, make sure that the
cable guide is correctly installed by clipping it onto the PCB at the top, back corner and
onto the metal casing.
onto the metal casing.
76
Chapter 5 Removal and replacement
ENWW