HP m2727 mfp 사용자 설명서
Redial manually
1.
Load the document into the automatic document feeder (ADF) input tray or onto the flatbed
scanner.
scanner.
2.
On the control panel, press
Redial
.
3.
Press
Start Fax
. If the pages that you want to send are in the ADF, then faxing begins automatically.
4.
If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press
1
to select Yes, and then press
OK
.
After you press
OK
, Load page: X Press
OK
appears on the control-panel display.
5.
If you have already placed the document on the flatbed scanner, press
OK
(or place the document
on the flatbed scanner and then press
OK
).
After scanning the page, Another page? 1=Yes 2=No appears on the control-panel display.
6.
If you have more pages to scan, press
1
to select Yes, and then repeat step 5 for each page of the
fax job.
-or-
If you are finished, press
2
to select No.
The product sends the fax to the number that it redialed. If the number is busy or does not answer, the
product redials the number based on its redial setting. If all redial attempts fail, the product updates the
fax activity log by adding the error.
product redials the number based on its redial setting. If all redial attempts fail, the product updates the
fax activity log by adding the error.
Use speed dials and group-dial entries
Send a fax by using a speed dial
1.
Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner.
2.
Press the one-touch key for the speed dial.
-or-
Press
Phone Book
, use the alphanumeric buttons to specify the speed-dial entry, and then press
OK
.
3.
Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner.
4.
Press
Start Fax
. If the pages that you want to send are in the ADF, then faxing begins automatically.
5.
If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press
1
to select Yes, and then press
OK
.
After you press
OK
, Load page: X Press
OK
appears on the control-panel display.
6.
If you have already placed the document on the flatbed scanner, press
OK
(or place the document
on the flatbed scanner and then press
OK
).
122 Chapter 10 Fax
ENWW