HP m2727 mfp 사용자 설명서

Alert and warning messages appear temporarily and might require the user to acknowledge the
message by pressing 

OK

 to resume or by pressing 

Cancel

 to cancel the job. With certain warnings, the

job might not complete or the print quality might be affected. If the alert or warning message is related
to printing and the auto-continue feature is on, the product will attempt to resume the printing job after
the warning has appeared for 10 seconds without acknowledgement.

A fax communication error occurred between
the product and the sender or receiver.

Allow the product to retry sending the fax.
Unplug the product telephone cord from the
wall, plug in a telephone, and try making a
call. Plug the product phone cord into a jack
for another phone line.

Try a different phone cord.

If the error persists, contact HP. See

 or the

support flyer that came in the product box.

Fax memory is full.

Cancel the fax by pressing 

OK

 or 

Cancel

.

Resend the fax. You might need to send the
fax in multiple sections if the error occurs
again.

The fax line to which you were sending a fax
was busy. The product has canceled sending
the fax.

Call the recipient to ensure that the fax
machine is on and ready.

Check that you are dialing the correct fax
number.

Check that the Redial if busy option is
enabled.

Check for a dial tone on the phone line by
pressing 

Start Fax

.

Make sure that the phone is working by
disconnecting the product, plugging in a
telephone to the phone line, and making a
voice call.

Plug the product phone cord into a jack for
another phone line, and then try sending the
fax again.

Try a different phone cord.

If the error persists, contact HP. See

 or the

support flyer that came in the product box.

The fax line to which you were sending a fax
was busy. The product automatically redials
the busy number. See 

Allow the product to retry sending the fax.

Call the recipient to ensure that the fax
machine is on and ready.

ENWW

Solve fax problems 129