HP procurve 2500 사용자 설명서

147    

Enhancements in Release F.04.08
Configuring Rapid Reconfiguration Spanning Tree (RSTP)

7.

Press the 

 key or use the arrow keys to go to the next parameter you want to change, then 

type in the new value or press the Space bar to select a value. (To get help on this screen, press 

 to select the 

Actions –> line, then press 

, for 

Help, to display the online help.)

8.

Repeat step 6 for each additional parameter you want to change.

Please see “Optimizing the RSTP Configuration” on page 139 for recommendations on config-
uring RSTP to make it operate the most efficiently.

9.

When you are finished editing parameters, press 

 to return to the 

Actions –> line and press 

 to save the currently displayed Spanning Tree settings and return to the Main Menu.

10. If you have changed the Protocol Version, in step 1, reboot the switch now by selecting

In the Web browser interface, you can enable or disable Spanning Tree on the switch. If the default 
configuration is in effect such that RSTP is the selected protocol version, enabling Spanning Tree 
through the Web browser interface will enable RSTP with its current configuration. To configure the 
other Spanning Tree features, telnet to the switch console and use the CLI or menu.

To enable or disable Spanning Tree using the Web browser interface:

1.

Click on the 

Configuration tab.

2.

Click on 

.

3.

Enable or disable Spanning Tree.

4.

Click on 

 to implement the configuration change.