HP procurve 2500 사용자 설명서
214
Enhancements in Release F.02.02
Operation and Enhancements for Multimedia Traffic Control (IGMP)
CLI: Configuring Per-Port Forced Fast-Leave IGMP
In the factory-default configuration, Forced Fast-Leave is disabled for all ports on the switch. To
enable (or disable) this feature on individual ports, use the switch’s MIB commands, as shown below.
enable (or disable) this feature on individual ports, use the switch’s MIB commands, as shown below.
Syntax:
setmib hpSwitchIgmpPortForcedLeaveState.1.<port-number> -i < 1 | 2 >
or
setmib 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.5.1.<port-number> -i < 1 | 2 >
where
:
1 = Forced Fast-Leave enabled
2 = Forced Fast-Leave disabled
For example, to enable Forced Fast-Leave on ports 7 and 8:
Figure 108. Example of Changing the Forced Fast-Leave Configuration on Ports 7 and 8
Command
Verification