HP procurve 2500 사용자 설명서

    14

Enhancements in Release F.05.05 through F.05.60

Configuring Per-Port LLDP Transmit/Receive

This command controls LLDP transmit/receive traffic on active ports.

For example, to disable LLDP on port 1, use the command:

ProCurve(config)# lldp admin-status 1 disable

Disable Auto-MDIX

The Auto-MDIX feature allows a user to connect 10/100 switch ports to either MDI or MDI-X devices 
using a straight-through cable.  In some situations it is desirable to disable this feature.  Beginning 
with release F.05.24 there is a global command,

 no auto-mdix, that disables Auto-MDIX for all ports 

that are in auto-negotiation mode.

Restrictions:

■

works only on copper ports

■

requires the port be brought down to change to/from Auto-MDIX

■

applies globally to all ports

■

with Auto-MDIX disabled, ports set to auto-negotiate operate in MDI-X mode

Syntax lldp admin-status < port-list > < enable | disable >

enable: With LLDP enabled on the switch in the default LLDP 
configuration, each port is configured to transmit/receive 
LLDP packets. This option lets you enable the specified port(s) 
to transmit/receive LLDP packets. (For versions F.05.59 and 
earlier, inbound LLDP packets from neighbor devices are not 
supported on 2500 series switches.)
disable: Disable LLDP packet transmit/receive on the specified 
port(s).