HP sas dl360 사용자 설명서

 

5.  Remove the expansion slot cover from the slot, if installed ("Installing an 

6.  Remove the expansion board from the slot, if installed. 

7.  Remove the applicable PCI riser boards from the assembly: 

IMPORTANT:  When removing the two parts of the riser board, pay 
attention to the orientation of the slots on each side. This information is 
important for subsequent procedures. 

a.  Remove the riser board with the slot for full-length expansion boards. 

 

b.  Repeat the previous step for the riser board with the slot for half-length 

expansion boards, if needed.