Canon bjc-6000 사용자 설명서

A message appears warning you NOT to start another operation until deep print
head cleaning is finished. Click the OK button.

The BJ Printer Status Monitor displays a message during deep print head
cleaning.

The 

POWER

light flashes during print head deep cleaning and then lights again

when deep cleaning is complete.

Deep print head cleaning takes about one to two minutes.

To check the print heads, print the Nozzle Check Pattern (see page 4-5).

If the problem has not been corrected after deep cleaning the print head four or
five times, it’s time to replace the BJ cartridge.

The printer’s cartridge holder holds two BJ cartridges. The BC-31 Color BJ Cartridge 
is installed on the right side at all times. In the left slot, you can install the BC-30 Black 
BJ Cartridge or a BC-32 Photo BJ Cartridge.

The most important thing you can do to extend the life of your printer and to
ensure optimum print quality is take care of the BJ cartridges.

Spilled ink can stain any surface. Open BJ cartridges and BJ tanks carefully, and
follow the guidelines presented here to protect against spilled ink.

■

When a BJ tank runs out of ink, replace it immediately. Do not leave an empty
BJ tank in a BJ cartridge installed in the printer.

■

Protect all surrounding surfaces (such as floors, furniture, and clothing) before
opening any BJ cartridge or BJ tank.

■

To avoid spilling ink, do not drop or shake BJ cartridges or BJ tanks.

4-10

Chapter 4