Canon B640 사용자 설명서
54
❚ The FAXPHONE beeps once to indicate that the document has been sent
successfully.
TRANSMITTING OK
❚ If an error occurs during sending, the FAXPHONE beeps intermittently for a few
seconds. If this happens, try sending the fax again.
❚ The FAXPHONE automatically redials if the receiving fax does not answer or if the
line is busy. (You can specify the number of times it redials; see AUTO REDIAL in
TX SETTINGS, p. 76.)
TX SETTINGS, p. 76.)
❚ To stop sending before the fax is finished, press [STOP]. Then you may need to lift
the operation panel to remove the document, see Clearing document jams, p. 58.
❚ If an error message appears on the LCD, correct the error and then press [STOP].
Refer to Error codes, messages and solutions, p. 98.
Automatic Dialing ______________________________
■ Sending a document using One-touch Speed Dialing or
Coded Speed Dialing
After registering the One-touch numbers or Coded Speed Dialing numbers you can
send documents as follows:
send documents as follows:
1
Feed the document face-down into the
Automatic Document Feeder (ADF).
Automatic Document Feeder (ADF).
See Loading the document, p. 45.
You can set the resolution and the density, p. 47.
You can set the resolution and the density, p. 47.
2
Press the One-touch Speed dialing button
assigned to the number to which you wish to
fax.
assigned to the number to which you wish to
fax.
or
Press [CODED DIAL] and enter the appropriate
two-digit Coded Speed Dialing code.
two-digit Coded Speed Dialing code.
Wait a second for the number to appear after the
name of the number.
❚ If no number is registered for the button or code
name of the number.
❚ If no number is registered for the button or code
you pressed, the LCD display shows the NO TEL#
message. Make sure you pressed the correct button
or entered the correct code and that the number you
want to dial is registered correctly.
message. Make sure you pressed the correct button
or entered the correct code and that the number you
want to dial is registered correctly.
❚ If you make a mistake, press [STOP]. Then press
the correct One-Touch Speed Dialing button or
press [CODED DIAL] and re-enter the code.
press [CODED DIAL] and re-enter the code.
❚ If an error message appears on the LCD, correct
the error and press [STOP]. If necessary, refer to
Frequently Asked Questions, p. 92.
Frequently Asked Questions, p. 92.
FINE
CANON FAX
12345678999
CANON CANADA
2345678999