Canon bjc-6000 서비스 매뉴얼
3. APPLYING GREASE
Apply greases at the points shown below.
Apply a thin film of grease using the flat brush. For the Carriage Oil Pad, do not use a
brush but apply directly.
For disassembly and reassembly procedures, refer to the parts catalog.
Apply a thin film of grease using the flat brush. For the Carriage Oil Pad, do not use a
brush but apply directly.
For disassembly and reassembly procedures, refer to the parts catalog.
Be careful not to contaminate wipers or caps with grease.
5-3
BJC-6000
Part 5: Maintenance
Figure 5-1 Grease Points
CAUTION
Paper Thickness Lever Sliding
Surface
Approx. 12 mg (Molykote PG-641)
Surface
Approx. 12 mg (Molykote PG-641)
Paper Thickness Lever Spring Sliding Surface
Approx. 12 mg (Molykote PG-641)
Approx. 12 mg (Molykote PG-641)
Carriage Guide Frame Back Surface (apply
a thin coat of grease over the entire surface)
Approx. 48 mg (Molykote PG-641)
a thin coat of grease over the entire surface)
Approx. 48 mg (Molykote PG-641)
Carriage Guide Frame Sliding Surface
(apply the proper amount of grease so as not to drip)
(Floil 946P)
(apply the proper amount of grease so as not to drip)
(Floil 946P)
Feed Roller Sliding Surface
Approx. 12 mg (Molykote PG-641)
Approx. 12 mg (Molykote PG-641)
Feed Roller Sliding Surface
Approx. 12 mg (Molykote PG-641)
Approx. 12 mg (Molykote PG-641)
Feed Roller Gear Teeth
(apply to all teeth evenly)
Approx. 96 mg (Molykote PG-641)
Eject Roller Gear Teeth (apply to all teeth evenly)
Approx. 60 mg (Molykote PG-641)
Approx. 60 mg (Molykote PG-641)
Slow-Down Gear Teeth
(apply to all teeth evenly)
Approx. 72 mg (Molykote PG-641)
(apply to all teeth evenly)
Approx. 72 mg (Molykote PG-641)
Cam Sliding Surface
Approx. 24 mg (Molykote PG-641)
Approx. 24 mg (Molykote PG-641)
Cam Sliding Surface
Approx. 24 mg
Approx. 24 mg
(Molykote PG-641)
Grease Pad
Approx. 0.7 cc (Floil 946P)
Approx. 0.7 cc (Floil 946P)