Canon bjc-6000 서비스 매뉴얼

This chapter consists of two sections: diagnosis and action.  If you do not know the
possible cause of the problem, consult the diagnosis section first.  If you know the
possible cause of the problem, skip to the action section.

1. Before starting diagnostic procedures, ensure that all connectors and ribbon cables

are correctly connected.

2. If you are diagnosing the problem with the printer's covers removed and with power

supplied, be careful not to get an electric shock from the power supply or short-
circuit the PC boards.

3. The flowcharts use the following symbols:

4. If you have replaced or repaired a part, be sure to make a test print to check that

the problem is corrected.  If the indicated measures of a specific step still fail to
correct the trouble, try again, skipping to the next step.

BJC-6000

Part 5:  Maintenance

Start/End

Operation

Judgement

Action/
Replace

Jump

Stop

1. Replace the ink

tank

2. Replace the BJ

cartridge

Do print problems

appear?

No

Yes

END

No

Yes

END

Poor print quality?

Do print problems

still appear?