Canon BJC-3000 사용자 설명서

49

The nozzle check pattern confirms whether the inks are being correctly ejected from the print head
nozzles and whether the print head on the BJ Cartridge is correctly aligned.  Print the nozzle check
pattern when the printouts are streaked or the colour tones are not correct, or after print head clean-
ing has been performed.

You can also print the nozzle check pattern directly from the printer.  Hold down the reset button, and
release it after the power lamp flashes twice.

Make sure that the printer is switched on and A4- or Letter-size plain paper is
loaded in the printer.

Select the nozzle check pattern in the printer driver.

➀

Open the Printer Properties dialogue box, then click the

Maintenance tab.

➁

Click the nozzle check pattern icon in the Test Prints box.

➂ 

When a confirmation message appears, click the OK button.

Look at the check patterns and perform the correction procedure if necessary.

Separate patterns are printed to display the status of the Color BJ Cartridge.

(When the Color BJ Cartridge is installed)

When the Photo BJ Color Cartridge is installed in the printer, refer to the "Printing a Nozzle
Check Pattern" section in the Reference Guide.

If the pattern is broken, missing or a
specific colour is not printed, see

“Cleaning the Print Head”.

If this portion is misaligned, refer to

"Aligning the print head".