Canon BJ-10sx 사용자 설명서

To select condensed or non-condensed printing in Epson LQ mode, 
follow these steps:

1. Make sure the printer is on-line.
2. Press the 

 button to switch between condensed and non-

condensed mode. Non-condensed is the default setting. The 
printer sounds a short tone for the condensed font style. The 
printer sounds a long tone for non-condensed mode. 

The printer includes two test prints: the self test and the font list. Use 
these test prints to check the operation of the printer.

You can print the self test in both printer control modes: BJ-10e mode 
or Epson LQ mode. The printer prints a repeating pattern of characters 
in the default print mode or pitch. 

In BJ-10e mode, the pattern is printed in Courier typeface at 10 cpi; the 
print mode is HQ. In Epson LQ mode, the pattern is printed in Roman 
typeface at 10 cpi; the print mode is HQ.

To start the self test, follow these steps: 

1. Press the 

 button to turn off the printer. 

2. Press and hold the 

 button, and press the 

 button 

until the beeper sounds. 

3. When the printer beeps, release the 

 button. When it 

beeps again, release the 

 button. When the cartridge stops 

turning, the 

POWER

 and 

ERROR 

indicators light.