Canon C4080I 사용자 설명서
Setting Up a Computer for Printing/Sending a Fax
5-9
5
Usi
ng a NetBIOS Netw
o
rk
Printer Connection Method
Windows
If Windows 2000/XP/Server 2003/Vista is on your network, the following procedure
enables you to set up a print server for more efficient management of network
printers. Once a print server is set up, print jobs can be managed by the print
server. Also, by setting up an alternate driver for the print server, printer drivers can
be installed in each computer via the network.
For instructions on how to set print servers, see the following procedures indicated
in the manual for each driver. (Since the UFR II printer driver is not supported by
Windows 98/Me, it cannot be used as an alternative driver.)
enables you to set up a print server for more efficient management of network
printers. Once a print server is set up, print jobs can be managed by the print
server. Also, by setting up an alternate driver for the print server, printer drivers can
be installed in each computer via the network.
For instructions on how to set print servers, see the following procedures indicated
in the manual for each driver. (Since the UFR II printer driver is not supported by
Windows 98/Me, it cannot be used as an alternative driver.)
•
If you want to use the PCL printer driver
See the procedure for alternative printer driver installation in Chapter 2, "Getting
Started," in the PCL Driver Guide.
See the procedure for alternative printer driver installation in Chapter 2, "Getting
Started," in the PCL Driver Guide.
•
If you want to use the PS printer driver
See the procedure for alternative printer driver installation in Chapter 2, "Getting
Started," in the PS Driver Guide.
See the procedure for alternative printer driver installation in Chapter 2, "Getting
Started," in the PS Driver Guide.
•
If you want to use the fax driver
See the procedure for alternative fax driver installation in Chapter 2, "Getting
Started," in the Fax Driver Guide.
See the procedure for alternative fax driver installation in Chapter 2, "Getting
Started," in the Fax Driver Guide.
NOTE
If you are using Windows Vista, a dialog box may be displayed while you are performing
the procedure. In this case, enter a user name and password. For more information, see
the manuals provided with the operating system.
the procedure. In this case, enter a user name and password. For more information, see
the manuals provided with the operating system.
1
Check the settings for both <RX/Print Range> and <Setting/
Browsing Range> in [IP Address Range Settings] on the IPv4
Settings screen, to see whether the IPv4 address of the
computer in which a driver is to be installed is permitted. See
step 17 in "TCP/IP Settings (IPv4)," on p. 3-3.
Browsing Range> in [IP Address Range Settings] on the IPv4
Settings screen, to see whether the IPv4 address of the
computer in which a driver is to be installed is permitted. See
step 17 in "TCP/IP Settings (IPv4)," on p. 3-3.
IMPORTANT
•
If the settings for both <RX/Print Range> and <Setting/Browsing Range> in [IP
Address Range Settings] on the IPv4 Settings screen do not permit the IPv4
address, you cannot install a driver.
Address Range Settings] on the IPv4 Settings screen do not permit the IPv4
address, you cannot install a driver.
•
If the IPv4 address of the computer is beyond the range of the permitted addresses
set for <RX/Print Range> after installing a driver, you cannot print or send a fax
from the computer.
set for <RX/Print Range> after installing a driver, you cannot print or send a fax
from the computer.