Canon faxphone l90 사용자 설명서

다운로드
페이지 214
4-3
Receiving Documents
Select the Receive Mode
Exit the Setting Menu
Press [
] or [
] to select the 
receive mode, then press [OK].
<FaxOnly>: Answers all calls as faxes.
<AnsMode>: Receives faxes automatically and records 
voice messages.
<DRPD>: Distinguishes between fax and voice calls if you 
want to use the handset or an external telephone.
<FAX/TEL>: Switches between fax and voice calls 
automatically if the handset or an external telephone is 
connected to the machine.
<MANUAL>: Does not answer any calls. You have to 
manually receive faxes.
For details on these settings, see Chapter 3, “Sending and 
Receiving,” in the Reference Guide.
For <FAX/TEL> or <MANUAL>, make sure the 
handset or an external telephone is connected to 
the machine.
For <AnsMode>, make sure an external telephone 
with built in answering machine is connected to the 
machine.
For <DRPD>, subscription to a DRPD service is 
required.
Press [Stop/Reset] to return to the 
standby mode.
You press [Stop/Reset] to cancel a job:
The <CANCEL DURING TX/RX?> message 
appears. Press [
] to select <Yes>. The 
job is canceled, and the display returns to 
the standby mode.
The <OUT OF TONER/CHANGE TONER> 
message appears:
The toner cartridge is almost empty. 
Replace the toner cartridge or you can 
continue printing by setting <CONT. 
PRINTING> to <ON>. For details on this 
error message, see “Replacing the Toner 
Cartridge,” on p.
 7-9.