Canon faxphone l90 사용자 설명서

다운로드
페이지 214
xxiii
What Can I Do with This Machine?
Users in the U.S.A.
Pre-Installation Requirements for Canon Facsimile Equipment
A.  Location
Supply a suitable table, cabinet, or desk. See p. 10-2 for the machine’s weight and dimensions.
B.  Order Information
1.  Only a single line, touch-tone or rotary telephone set is to be used.
2.  Order an RJ11-C modular jack (USOC code), which should be installed by the telephone 
company. If the RJ11-C jack is not present, installation cannot occur.
3.  Order a regular voice grade line or the equivalent from your telephone company’s business 
representative.
Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-or-
IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE OVERSEAS
Canon recommends an individual line following industry standards, e.g. the 2500 (Touch Tone) or 500 
(Rotary/Pulse Dial) telephones. A dedicated extension off a PBX machine without “Call Waiting” can be 
used with the machine. Key telephone systems are not recommended because they send non-standard 
signals to individual telephones for ringing and special codes, which may cause a fax error. This machine 
is not supported on Voice Over Internet Protocol (VOIP).
C.  Power Requirements
This equipment should be connected to a standard 120-volt AC, three-wire grounded outlet 
only. Do not connect this machine to an outlet or power line shared with other appliances that 
cause “electrical noise.” Air conditioners, electric typewriters, copiers, and machines of this 
sort generate electrical noise which often interferes with communications equipment and the 
sending and receiving of documents.