Canon fax-phone b740 매뉴얼
Chapter 2
Setting Up
2-15
Setting Up
Loading Paper
This section describes how to load plain paper in the multi-purpose tray so that you can
begin using your copier/fax.
begin using your copier/fax.
For more details on paper requirements and selecting paper, see Chapter 5, Paper
Handling.
Handling.
Paper Guidelines
• Use cut-sheet paper only, not paper that comes on a roll.
p. 5-2). Thick
paper can come into contact with the print head nozzles and cause damage to the BJ
cartridge.
cartridge.
• Do not load paper beyond the paper limit mark (
P
) or beyond the tab on the multi-
purpose tray. Doing so may cause paper feeding or printing problems. Also, make
sure there are no gaps on either side of the paper stack.
sure there are no gaps on either side of the paper stack.
• If the paper has a print side, set it in the multi-purpose tray with the print side facing
upward.
• The capacity of the output tray is 50 sheets of paper. To prevent paper jams, remove
paper from the output tray before the count reaches 50.
• Let the paper run out before refilling the multi-purpose tray. Avoid mixing “new” paper
with paper already loaded.
• Do not leave paper stacked in the multi-purpose tray for long periods of time since it
may bend or curl over time, and cause paper jams or misfeeding problems.
• Certain environmental conditions, such as extreme temperatures or humidity, can
cause some paper to misfeed in the multi-purpose tray. If you have trouble with paper
becoming skewed or multiple sheets being fed, do not stack them in the multi-purpose
tray, but feed them one sheet at a time.
becoming skewed or multiple sheets being fed, do not stack them in the multi-purpose
tray, but feed them one sheet at a time.
PAPER LIMIT MARK
NO GAPS HERE
TAB