Canon fax-jx200 사용자 설명서

Before Using Your Machine

Turn on the machine before starting printing.

„

Before turning on the machine, confirm that the FINE Cartridge is set into place.

To turn on the machine, press [ON/OFF].

[ON/OFF] flashes green for a while, and then turns on.

„

To turn off the machine, press [ON/OFF] about a few seconds.

The machine is off after <SHUTTING DOWN....> is displayed on the LCD.

If preparatory operations are not yet finished, follow the Easy Setup Instructions to complete them.

z

If an error message is displayed on the LCD, see “LCD Messages” on page 62.

z

The LCD will turn itself off if inactive for more than 5 minutes, press any button on the Operation 

Panel except for [ON/OFF] to restore the display.

z

Always press [ON/OFF] before disconnecting the power cord. This ensures the FINE Cartridge 

is covered to prevent it from drying out.

z

If the machine is not used for an extended period of time, we recommend making copies or 

performing FINE Cartridge cleaning about once every month to prevent degradation of the FINE 

Cartridge.

z

The FINE Cartridge has many nozzles in order to produce high-definition prints. In the same 

way that the tip of a felt-tip or marker pen will naturally dry out over time and become unusable 

even with the cap in place, the nozzles might become clogged. Periodically printing or 

performing FINE Cartridge cleaning can help to prevent this kind of clogging.

z

If you change to another telephone line, turn off the machine before unplugging the telephone 

line cable.

The power cannot be turned OFF with [ON/OFF] while the machine is operating.