Canon fax-jx200 사용자 설명서

Receiving Faxes

Once you have decided which mode is suitable for your needs, set the mode by pressing [Receive 
Mode/Resolution]. 

Press [Receive Mode/Resolution].

Every time you press [Receive Mode/Resolution], the mode changes cyclically.

„

„

If you set Fax/Tel mode, you can control precisely how the fax handles incoming calls by 
adjusting the following settings: 
z

Adjust the time the fax takes to check whether a call is from a fax machine or a telephone 
(<RING START TIME> setting).

z

Adjust the length of time the fax rings when the call is a voice call (<TEL RING TIME> 
setting).

z

Set whether the fax switches to receive mode after the ring time set in <TEL RING TIME> has 
elapsed (<DEFAULT ACTION> setting).

Press [Menu].

Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The 
LCD displays <USER SETTINGS>.

Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD 
displays <ECM RX>.

Use [{] or [}] to select <FAX/TEL AUTO SW>, then press [Start/Copy]. The LCD 
displays <RING START TIME>.

Press [Start/Copy].

Use the numeric buttons, or [{] or [}] to enter the time the fax waits before ringing 
when it receives a call, then press [Start/Copy] twice.

Use the numeric buttons, or [{] or [}]  to enter the time the fax rings while waiting 
for someone to pick up the Handset, then press [Start/Copy] twice. The LCD 
displays <RECEIVE>.

z

If paper jams, see “Troubleshooting” on page 53.

z

If the Ink Lamp lights up faxes will be received to memory.

8SEC.

22SEC.