Canon fax-jx200 사용자 설명서
59
Troubleshooting
Telephone Problems
You Cannot Dial
The Handset, Telephone, or Extension Phone Disconnects While You
are Talking
are Talking
There is Interference on the Line
Print Quality Problems
The Print Quality is Not What You Expect; Print is Not Clear, is
Splashed, has Missing Dots or White Streaks
Splashed, has Missing Dots or White Streaks
Cause
Action
The telephone line may not be
connected properly.
connected properly.
Make sure all line connections are secure (see the Easy Setup Instructions).
The power cord may not be plugged in
securely.
securely.
Check that the power cord is plugged securely into the fax and into the wall
outlet (see the Easy Setup Instructions). If the fax is plugged into a power strip,
make sure the power strip is plugged in and turned on.
outlet (see the Easy Setup Instructions). If the fax is plugged into a power strip,
make sure the power strip is plugged in and turned on.
The machine may not be switched on.
Press the [ON/OFF] to turn the machine on.
The fax may not be set for the type of
telephone line in use (pulse/tone).
telephone line in use (pulse/tone).
Make sure the fax is set for the correct telephone line type (see page 10).
Cause
Action
The telephone line cord may not be
plugged in securely.
plugged in securely.
Check that the telephone line cord is plugged securely into the fax and into the
telephone line jack on your wall.
telephone line jack on your wall.
Cause
Action
A mobile phone or cordless phone may
be in use near the fax.
be in use near the fax.
Make sure that mobile phones and cordless phones are not used near the fax.
Cause
Action
The paper you are using may not be
supported by the fax.
supported by the fax.
Make sure you are using the recommended paper (see page 16).
You may be printing on the wrong side
of the paper.
of the paper.
Some papers have a “right” side for printing. If the print quality is not as clear as
you would like it to be, try turning the paper over and printing on the other side.
you would like it to be, try turning the paper over and printing on the other side.
The nozzles on the FINE Cartridge
print head may be clogged.
print head may be clogged.
Clean the FINE Cartridge print head if necessary (see page 46).
The FINE Cartridge may not be
installed properly.
installed properly.
Make sure the FINE Cartridge is installed properly (see the Easy Setup
Instructions).
Instructions).
The FINE Cartridge print head may be
damaged.
damaged.
Determine if the problem is with the FINE Cartridge print head (see page 46)
and replace the FINE Cartridge if necessary (see page 43).
and replace the FINE Cartridge if necessary (see page 43).