Canon imageclass 2300n 네트워크 가이드
Protocol Settings
2-13
Using a
TCP/IP Netw
o
rk
(Windo
ws/UNIX)
2
Protocol Settings
You can specify the machine's protocol settings on the computer by using any of
the following software. Specify the settings using the easiest method.
the following software. Specify the settings using the easiest method.
•
NetSpot Device Installer (Canon software included on the Network User Software
CD-ROM)
CD-ROM)
•
NetSpot Console (via a web browser) (Canon software included on the Network
User Software CD-ROM)
User Software CD-ROM)
•
A web browser (Remote UI)
•
An FTP client
IMPORTANT
You can enhance the security by setting the range of IP addresses of the computers
authorized to access the machine. Once you set the range of IP addresses of computes
from which data can be sent to the machine for printing, the machine rejects data sent
from computers whose IP addresses are not allowed. For instructions on how to register
the IP addresses of computers permitted or rejected to print on the machine, see
Chapter 2, "Remote UI Functions," in the Remote UI Guide.
authorized to access the machine. Once you set the range of IP addresses of computes
from which data can be sent to the machine for printing, the machine rejects data sent
from computers whose IP addresses are not allowed. For instructions on how to register
the IP addresses of computers permitted or rejected to print on the machine, see
Chapter 2, "Remote UI Functions," in the Remote UI Guide.
NOTE
If you change the IP (Internet Protocol) address on the web browser (Remote UI), the
change will not be reflected on the display of the machine. You can confirm the change of
the IP address by checking "VIEW IP ADDRESS" under the Network Settings menu, or
by printing a User Data List.
change will not be reflected on the display of the machine. You can confirm the change of
the IP address by checking "VIEW IP ADDRESS" under the Network Settings menu, or
by printing a User Data List.
Settings Using NetSpot Console or NetSpot Device
Installer
Installer
You can install NetSpot Console or NetSpot Device Installer from the Network User
Software CD-ROM provided with the machine, and use it to specify the protocol
settings on the computer you are using.
Software CD-ROM provided with the machine, and use it to specify the protocol
settings on the computer you are using.
For instructions on how to install NetSpot Console or NetSpot Device Installer, and
how to specify the protocol settings using NetSpot Console or NetSpot Device
Installer, see "NetSpot Console," on p. 5-3, or "NetSpot Device Installer," on p. 5-2,
respectively.
how to specify the protocol settings using NetSpot Console or NetSpot Device
Installer, see "NetSpot Console," on p. 5-3, or "NetSpot Device Installer," on p. 5-2,
respectively.
NOTE
•
You can also find online instructions on how to install NetSpot Console in the NetSpot
Console User's Guide or the Readme file, and how to set protocol settings in the NetSpot
Console User's Guide, Online Manual, or Online Help, all of which are included in the
NetSpot Console folder on the Network User Software CD-ROM provided with the
machine.
Console User's Guide or the Readme file, and how to set protocol settings in the NetSpot
Console User's Guide, Online Manual, or Online Help, all of which are included in the
NetSpot Console folder on the Network User Software CD-ROM provided with the
machine.