Canon imageclass 2300n 네트워크 가이드

Protocol Settings

Using a NetW

a

re Netw

o

rk

 (Windo

ws)

You can specify the protocol settings of the machine by using any of the following 
software. Specify the settings using the easiest method.

•

NetSpot Device Installer (Canon software included on the Network User Software 
CD-ROM)

•

NetSpot Console (via a web browser) (Canon software included on the Network 
User Software CD-ROM)

•

A web browser (Remote UI)

•

An FTP client

You can install NetSpot Console or NetSpot Device Installer from the Network User 
Software CD-ROM provided with the machine, and use it to specify the protocol 
settings on the computer you are using.

For instructions on how to install NetSpot Console or NetSpot Device Installer and 
how to specify the protocol settings using NetSpot Console or NetSpot Device 
Installer, see "NetSpot Console," on p. 5-3, or "NetSpot Device Installer," on p. 5-2, 
respectively.

IMPORTANT

•

The machine's MAC address is necessary. To check the MAC address using the control 
panel, follow the procedure below to perform a test print.
1. Press 

(PRINT)

➞

 (OK) on the control panel; the Online indicator goes 

off.

2. Press 

 (MENU) until <TEST MENU> appears.

3. Press 

 (ITEM) until <PRINT EN CONFIG> appears in the second line of the 

display.

4. Press 

 (ENTER).

•

Check that the machine is connected to the network and that the machine's power is 
turned ON.

NOTE

•

You can also find online instructions on how to install NetSpot Console in the NetSpot 
Console User's Guide or the Readme file, and how to set protocol settings in the NetSpot 
Console User's Guide, Online Manual, or Online Help, all of which are included in the 
NetSpot Console folder on the Network User Software CD-ROM provided with the 
machine.