Canon imageclass 2300n 네트워크 가이드

Setting Up a Computer for Printing

Using a NetBIOS Netw

o

rk

 (Windo

ws 95/98/Me)

In order to print, it is necessary to install the printer driver. (See Chapter 1, "Before 
You Start Using This Machine," in the PCL Driver Guide.)

When the screen for selecting the printer destination is displayed during printer 
driver installation, select [Local Printer]. Do not select [Network Printer].

The port selection can be changed after installation.  You can select any port, such 
as [LPT1].

IMPORTANT

•

If the IP address range settings do not permit the IP address, you cannot install a printer 
driver.

•

If the IP address of the computer is beyond the range of the permitted addresses in the 
IP Address Range Settings menu in the Remote UI, you cannot print from the computer.

To set the printer destination, follow the procedure below.

❑

Insert the CD-ROM into the CD-ROM drive.

❑

Double-click the [My Computer] icon on the screen.

❑

Right click the CD-ROM drive icon 

➞ click [Open] on the pop-up menu.

❑

Double-click the Portmon folder.

❑

Double-click the [Setup] icon.

In some environments, this icon appears as [Setup.exe].

The install program starts.

❑

Follow the instructions on the screen to complete the installation.

NOTE

Depending on the environment you are using, the CD-ROM menu may be 
automatically displayed when you insert the CD-ROM into the CD-ROM drive. In 
this case, click [End] 

➞ perform the procedures in this step.

❑

On the [Start] menu, point to [Settings] 

➞ click [Printer].