Canon imageclass mf3240 사용자 설명서
1
2
3
4
5
6
Back
1-8
DRPD: Optional Settings
If required, change the optional settings as follows:
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <FAX
SETTINGS>, then press [OK].
3.
Use [
] or [
] to select <RX SETTINGS>,
then press [OK].
4.
Use [
] or [
] to select <RX MODE>,
then press [OK].
5.
Use [
] or [
] to select <DRPD>, then
press [OK].
6.
Use [
] or [
] to select a ring pattern,
then press [OK].
<NORMAL RING>
<DOUBLE RING>
<SHORT-SHORT-LONG>
<SHORT-LONG-SHORT>
<OTHER RING TYPE>
<DOUBLE RING>
<SHORT-SHORT-LONG>
<SHORT-LONG-SHORT>
<OTHER RING TYPE>
7.
Press [Stop/Reset] to return to standby
mode.
mode.
■
Memory Reception
The machine automatically receives faxes in memory when
printing is disabled under certain conditions (e.g., toner or paper
has run out).
When the problem is cleared, the machine automatically prints
the fax which was stored in the memory.
printing is disabled under certain conditions (e.g., toner or paper
has run out).
When the problem is cleared, the machine automatically prints
the fax which was stored in the memory.
NOTE
– The machine memory can store up to 256 fax jobs or approximately
256 pages.*
*Based on the condition that the other party sends the fax by the
imageCLASS MF3200 Series with ITU-T Standard Chart No. 1,
standard mode. The maximum number of pages that the machine's
memory can store differs depending on the other party's machine.
*Based on the condition that the other party sends the fax by the
imageCLASS MF3200 Series with ITU-T Standard Chart No. 1,
standard mode. The maximum number of pages that the machine's
memory can store differs depending on the other party's machine.
– Once the pages are printed, they are deleted from the memory.
– If the memory becomes full, you will not be able to receive the
– If the memory becomes full, you will not be able to receive the
remaining pages. Contact the other party and ask them to resend the
remaining pages of the fax.
remaining pages of the fax.