Canon imageclass mf3240 사용자 설명서
1
2
3
4
5
6
Back
5-16
Telephone Problems
Cannot dial.
Q
Is the telephone cable connected properly?
A
Make sure the cable is connected properly. (See
“Connect Telephone Cables,” in the Starter Guide.)
“Connect Telephone Cables,” in the Starter Guide.)
Q
Is the power cord plugged in securely?
A
Check that the power cord is securely plugged into
the machine and into the wall outlet. If the machine
is plugged into a power strip, make sure the power
strip is plugged in and turned on.
the machine and into the wall outlet. If the machine
is plugged into a power strip, make sure the power
strip is plugged in and turned on.
Q
Is the machine set for the correct telephone line
type?
type?
A
Make sure the machine is set for the correct
telephone line type. (See “Set the Telephone Line
Type,” in the Starter Guide.)
telephone line type. (See “Set the Telephone Line
Type,” in the Starter Guide.)
Telephone disconnects while you are talking.
Q
Is the telephone cable connected properly?
A
Make sure the cable is connected properly. (See
“Connect Telephone Cables,” in the Starter Guide.)
“Connect Telephone Cables,” in the Starter Guide.)
Q
Is the power cord plugged in securely?
A
Check that the power cord is securely plugged into
the machine and into the wall outlet. If the machine
is plugged into a power strip, make sure the power
strip is plugged in and turned on.
the machine and into the wall outlet. If the machine
is plugged into a power strip, make sure the power
strip is plugged in and turned on.
Q
Is the telephone cable defective?
A
Use another cable.
Calls do not connect, or the wrong number is dialed.
Q
Did you confirm the dial tone before entering
the fax number?
the fax number?
A
Make sure to confirm the dial tone before entering
a fax number. If you enter the number before the
dial tone can be heard, the call may not be
connected, or the wrong number may be dialed.
a fax number. If you enter the number before the
dial tone can be heard, the call may not be
connected, or the wrong number may be dialed.